Sliding interior doors

Improvement of technology and the emergence of new materials made it possible to bring roller doors to the modern market, which have already gained popularity. The convenience of the mounting system in this case plays a huge role. Those who want to save space will make the right choice in favor of sliding interior doors.

Elegant design solutions, which can be seen in the presented photos, emphasize the style of any room. Sliding door will be the best option for a private home, apartment or office. The price of such products varies. There are budget options available to the buyer, and expensive models of custom sizes made of high quality materials.

Interior structures are equipped with a special mechanism that allows the canvas to roll sideways, and not to swing open. This happens with the help of guide rails, the installation of which is possible both from above and from below. Fixation is made by a special stopper.

Differences of sliding doors from sliding

To be precise, there are differences between sliding doors and sliding doors, although it is often believed to be one and the same. Consider technical characteristics of two designswhich entail a difference in operation.

Some door leaves, as the name implies, are pushed to the side, while others are rolled back after touching them. The latter have wheels at the bottom of the wheels, which are a strong support point that can withstand the weight of the structure. Sliding doors of such an emphasis are devoid of and move with the help of the applied force along a steel rail fixed to the wall. Differences of doors consist in movement systems. You can see photos of the designs of different mechanisms.
Sliding doors are always double-leafed, that is, there is no way to move them in one direction. The operation of such a model without the use of roller mechanisms. The retractable model on wheels can be moved apart in either one or both directions.
The sliding door is least durable, while the emphasis on the floor gives the sliding model an extended service life.
The roll-back mechanism on casters moves above and below. It is most convenient due to its noiselessness. Often models are equipped with rubber wheels.

Material for sliding interior doors

Sliding doors made from a wide variety of materials, which allows you to use interesting solutions in design. And the manufacture of custom models to order increases consumer demand.

There are models of solid wood, laminated veneer, particleboard, MDF, aluminum. Often combined versions are made of wood and glass. A great option for those who want to visually increase the space are doors made of large mirrors. Retractable oak or walnut structures are much more expensive, but they look elegant and attractive.

If we talk about the door interior door made of glass, then it has a design different from others. The sliding mechanism, when opened, is hidden in a pre-prepared wall niche. This provides an expansion of space, but significantly complicates installation work. The price of such doors depends on the degree of hardening, the applied patterns. Tempered glass can have a matte, stained glass texture and all kinds of color schemes. Models artificially age, apply engraving, photo printing, which also affects the increase in the price of the product.

The photo shows sliding doors made of a wide variety of materials.

Mounting method

There are two structural systems:

The upper pendant is invisible in the room, especially since there is an opportunity to make it hidden. This option is considered in the photo.
Double pendant is much stronger than the first solution, but it has disadvantages. The lower rail with the wheel travel cannot be masked. Often it becomes clogged with dust, foreign objects, which can lead to damage to the device.

Hardware kit Sliding interior door:

guide rails
roller mechanism
fastenings for the product,
door leaf travel limiters,
sashes with clamps of their position,
platbands and plank,
locks and handles.

Sliding interior door price

Choosing the right one among the various door options, attention is paid to the price of the product. Costs included door leaf cost and sliding mechanism, plus fittings and installation. Identical designs may vary in price, it depends on the option of opening doors.

Installation of products with a special niche where the sashes are hidden requires a lot of time and money. Accordingly, the price of such an interior design will be higher. Doors with one or two wings will also vary in value. In the catalog of factories specializing in the production of sliding doors, you can see photos of various designs and compare prices.

Glass interior doors, made using stained glass technique or with a printed pattern, will become a real decoration of the house (models are shown in the photo). Such a tempered glass sheet is very expensive in price, but it is universal in application.

For convenience and beauty you will have to pay, however, the cost will be paid off with the durability of the product, which does not require additional investment in repairs. Precise gears and durable materials are worth the price.

How to make the right choice

Before installing retractable products, make sure that there are no heating or water pipes at the installation site. If you need to create a niche, it is made from drywall with additional gain.
When choosing a door, it is taken into account that its size will block the opening. If the canvas is smaller, then all unaesthetic gaps will be visible.
The hardware should not interfere with the movement of the sliding device, so it is chosen as a hidden type.
The canvas should move freely along the entire length of the wall. The guides may have differences in appearance, tubular or rectangular with a groove for the roller are used. The principle of mounting rails is the same.

Mounting options for sliding interior doors

A special opening is used.. The most time-consuming way in which you need to contact professionals for its equipment.
Closing closed doors to a pre-installed rack.
Smooth movement on the wall. A popular method that requires fixing the guide rails on the floor (photo models are presented).

Pros of a sliding interior door

Space increase using special mechanisms.
Modern design using various materials will help to acquire an attractive appearance to the interior of any room.
There is an additional opportunity to automatically control the sliding interior mechanism.
Beautiful disguise of the room.
Compact device that does not require much space.

Disadvantages of a sliding interior door

The obstacle in the form of a lower guide is not very convenient, especially for the elderly and children.
Rail builds up dirt on the floorwhich is difficult to fight. You will have to use not only a broom, but also thoroughly clean it with a rag.
Such designs do not hold sound and noise, they are not designed to retain heat. As entrance doors are unsuitable. They are used exclusively as an interior option, dividing the space into rooms.
The work of the sliding device is carried out with free space of the walls near the doorway, it will not work to decorate it.
Hardware price Sliding interior doors are much higher than conventional models.
A special mechanism should be installed only by professional firms. Sometimes it is necessary to dismantle part of the wall during installation, so it is difficult to cope on their own.

Retractable interior designs represent a new format of elegance and convenience. This simple device will save space and add sophistication to the room.

Features

It is a mistake to believe that sliding and sliding doors are of the same design, although in the first and in the second cases, the canvases are moved apart in different directions. However, the retractable design provides for the presence of special wheels, which account for the entire mass of the attribute leaf. It turns out that the second option has a reliable fulcrum, and in the first there is none, while the canvases simply move along the upper guides. Such an insignificant difference in the mechanism extends the sliding doors to the operational period, which is the main plus of this model.

In addition to a long service life, sliding products have other advantages:

During use, the door does not warp and does not jam. It is also important here the quality of the materials themselves and their installation, however, the reliability of the mechanism is a definite advantage.
When opening and closing such an attribute, there is practically no noise. This is ensured by two pairs of rollers located in the upper and lower parts of the web. Some models have rubberized rollers.
Thanks to the installation of rollers on the upper and lower guides, the sliding products protect the room from drafts.
If desired, such a mechanism can be made automatic.

What are their features

In order to understand the fundamental difference between the sliding and sliding structure, it is necessary to study the system of their functioning, which is already reflected in the name itself. What is a typical sliding door structure? These are two door leaves that move apart in different directions from each other.

The sliding door also slides to the sides, but it rolls around. Yes, speaking roughly, such doors can be called sliding in some way, but unlike most other similar models, sliding solutions are equipped with special wheels, which account for the entire weight of the door leaf. Thus, this design differs from the sliding one by the presence of a reliable and rigid fulcrum.

Now it is worth taking a look at the sliding doors again - there is no rigid support in them and the canvases simply move along the upper guides. Often, a small difference in performance and design features eventually results in serious differences in performance, including operational.

The main advantage possessed by sliding interior doors is a higher durability in comparison with sliding. This is because the designers in the systems provided for the support point of the door leaf on the floor.

But the high durability of rolling products is not everything. For many years of operation with a rolling solution, no problems happen. The canvas will not warp during use and will not jam. But in general, it depends on the mechanism, its quality and installation. There are sliding door solutions that serve without any problems, but this is very rare.

Door leafs equipped with two pairs of rollers (in the upper and lower parts) move much easier, and in the process of moving from them there is practically no noise. The noise reduction level depends on the configuration - for example, some manufacturers complete their door models with rubberized rollers.

The design of the sliding interior door can be either double-leaf or single-leaf. This is due only to the mechanisms used. In sliding door leafs, mechanisms can be used without rollers at all - these models function just like furniture cabinets.

Despite all the differences, these are still rather conditional criteria that do not play a special role for a simple user. When choosing a door, it is better to pay attention to the advantages or disadvantages of the door mechanisms of a particular model.

Cons and pros of sliding door solutions

Sliding and sliding door structures are interesting in that they have the same number of advantages and disadvantages. This can sometimes cause quite conflicting thoughts, which makes the choice more difficult. After serious thought, people, moving along the path of least resistance, choose systems that seem more advantageous. Also often people buy what the seller aggressively offers. This is fundamentally the wrong approach.

If you highlight the advantages of sliding interior doors, then this is reliability and durability, but for this the mechanism must have two pairs of working rollers. Such door leafs reliably protect the room from drafts, unlike conventional sliding doors, which are attached to the upper guide - products can make unpleasant sounds when exposed to wind.

It is very easy to turn a sliding door into an automatic one, while a conventional sliding door that is mounted on the top rail cannot be automated.

If we highlight the shortcomings, then door structures of this type have one, especially significant minus. This is the bottom guide. On the one hand, it makes the web run quieter, and on the other, it can create significant problems when walking through an aperture. It is very easy to cling to such a guide, even if it is recessed at the same level with the floor covering. And also, various debris is clogged in this very guide, which does not affect the mechanism in the best way. There are also some more negative points.

Such a door leaf does not provide any heat and sound insulation. This is not the best choice for kitchens, bathrooms and bathrooms. An excellent option for these rooms - cassette designs or rotary.

The walls, which are located next to the doorway at a distance of movement of the canvas, cannot be used at least somehow. You can not hang pictures, various shelves and other decor items, because you will need unallocated space to ensure the functioning of the door.

In general, these are all the disadvantages. And what kind of mechanism will be better in a particular situation is up to you.

Materials for production

Often, manufacturers use mainly wood of expensive species, aluminum and glass. Decorative processing can be completely different depending on the price category of the product.

Most manufacturers make such designs from solid paintings, but other options are possible.

Specifications

Specifications depend on the hardware that the door leaf is supplied with. So, most of the sliding interior doors are equipped with guides for the upper and lower fasteners, web limiters, rollers, sash latches, handles and locks, a set of fasteners.

To reduce the intensity of noise during the movement of the canvases, manufacturers, as already noted, use rubberized rollers. Often used in two rollers. If the canvas weighs more than 75 kg, then four rollers are used.

Design

Modern doors are no longer similar to those simple plastic structures that were sold 25 years ago. Now such products demonstrate the most daring ideas of designers. Models will look great in small apartments, where they will also perform a practical function - saving space.

The style of the sliding door is very easily determined by the material from which it is made.So, for ascetic modern interiors, you can use door panels made of solid tempered glass - such solutions can also be successfully combined with metal. More environmentally friendly interiors involve combinations of natural materials - it can be bamboo, veneered elements, leather and much more.

MDF door solutions, which are decorated with bright paint and complemented by glass inserts, are ideal for rooms made in the Mediterranean style. You can look at how sliding interior doors in various interiors will look in the photo in our article.

Installation Nuances

If you need to install such a door, it should be borne in mind that the walls made of foam block or drywall, will need to be further strengthened. The fact is that when using such materials, sliding interior doors can fall off sooner or later: the wall will not support the weight of the paintings and the mechanism. To solve this issue, you can apply special embedded elements.

If suddenly there is no door on sale, then you can make it yourself - a sliding mechanism is simply and easily installed on the canvas you like and the dream door is ready.

What is a sliding door

Structures called sliding and sliding, as well as compartment doors (similar to the system used in trains) are designed for zoning rooms. In this case, you can especially not think about the height of the room.

Sliding single-door models consist of a single sheet and mounting hardware made of metal. To move the structure, rollers are designed on which the door is fixed. They move along a guide fixed above the opening.

What explains the popularity of sliding doors:

the main advantage of the sliding structure is the opportunity to save space near the opening, the presence of which is usually required in order to be able to open or close the swing door,
the sash can have various sizes: width - up to 1500 mm, height - up to 3 m,
despite the principle of movement of the canvas along the guides, it is possible to do without a threshold, which facilitates the movement between rooms, and also increases the aesthetics of the interior,

sliding door leafs are made from different materials, a variety of decorative techniques are used,
sliding doors are a spectacular interior element, they are in perfect harmony with various style concepts, from classic to modern.

You can install a compartment door to separate a children's room, living room or bedroom. Often such designs are used in order to isolate the kitchen from the dining room. A good option would be a sliding system for the dressing room or pantry. Usually a single door model is the best solution for small housing.

Prices for interior single-door sliding doors

Along with numerous advantages, retractable models have certain disadvantages:

due to the insufficiently tight fit of the canvas to the wall (when moving along the wall, a small gap must be ensured that prevents the door from touching), it is not possible to achieve a good level of sound and light insulation,
if the sash moves along the wall, there is no way to place interior items directly near it,
when moving the canvas, noise can be heard, which is especially unpleasant when installing such a system in the bedroom, and can also irritate sensitive sleeping people,
sliding door structures require periodic maintenance, as well as monitoring the condition of the fittings and careful operation.

You can solve the problem of poor insulation of the door leaf by using the option of installing the mechanism in a niche located in the wall.

Do not forget that the cost of the mechanisms necessary for installing compartment doors is slightly higher than the standard fasteners (hinges) for swing models, which, inter alia, translates into a higher total price of products. Owners, for whom an important aspect of the choice of the method of repair and finishing work is their budget, this method of doorways is unlikely to work.

Varieties of indoor sliding structures

Sliding doors, consisting of a single leaf, are relatively simple designs, a wide variety of models is not observed, however, there are several aspects that allow the classification of products. There are many more types of multifold systems, for example, telescopic or radius.

Mechanism installation method

Depending on the place chosen for the installation of the structure, all retractable models can be divided into two varieties.

Sliding doors located inside the opening. The whole system is completely located in the plane of the supporting wall, and the opening sash is recessed in it. This principle of operation allows one of the drawbacks of sliding models to be eliminated, namely, difficulties with placing interior items directly near the wall along which the canvas moves. In this case, there is no interference. In addition, on the wall itself, you can easily hang accessories and other elements: watches, bookshelves, photographs, paintings, etc. Installing decorative floor skirtings also does not interfere.

However, for the functioning of such a sliding door, the niche in the wall must be thought out in advance, even at the stage of repair work in the home. Otherwise, you will have to install a special frame, which will reduce the usable area of the room.

Wall mounted structure above a doorway. The door is moved along its surface. In apartments and houses, sliding systems are usually installed, equipped only with the upper guide. This allows you to get rid of an ugly and uncomfortable threshold. The lower bearing guide is added only when the reliability and durability of the structure require it (for example, if the canvas is very heavy).

The mechanism can be mounted both on the wall and on the ceiling. In the latter case, it becomes possible to visually increase the height of the room.

Important! The quality used to install the sliding door accessories are high requirements. You should not save on these products, since they largely determine the functional characteristics of the entire system.

Material

The design of doorways is of great importance for creating a harmonious and holistic interior. The choice of the type of structures is made based on the preferences of the owners of the premises and their material capabilities, as well as compliance with the overall design. Door leaf can be made of:

wood
materials containing wood fibers,
glass
plastics
metal (aluminum).

Glass cloth

The use of glass in the manufacture of a sliding door allows you to add light to the room and visually expand the space. Glass and mirror canvases can be installed everywhere, since they are completely not subject to external influences of both climatic and mechanical nature. Therefore, the installation of such models in bathrooms or kitchens does not create problems.

The only significant drawback that the glass structure has is its relative fragility. However, modern glass processing methods make it possible to create impact-resistant material, which is not so easy to break. The disadvantages include the need for frequent and thorough care of the door leaf made of glass. Otherwise, the door will look messy. Well, the price category of many models does not apply to the budget.

To make the glass sliding structure look attractive, many tricks are used:

glass staining in bulk,
tinting material
frosting glass
sandblasting,
painting, etc.

Mirror doors can significantly increase the area of the room.

Wooden doors, canvases made of wood materials

A classic version of an expensive interior door is structures made of solid wood. However, they are quite bulky, which often leads to the need to use a lower guide.

Modern analogs of wooden doors that mimic natural material are products made from MDF panels or laminated particle boards. The first option, which is more resistant to various environmental influences, looks the most preferable for the operational characteristics of the products. But products from chipboard are economical, which often becomes a decisive factor when choosing a model.

As close as possible to esthetic characteristics to wooden structures, models finished with natural veneer.

Plastic door

The retractable model can also be made of polymers. These designs cannot boast of special attractiveness and variety of finishes, however, modern technologies allow to give such products various, quite interesting textures.

The advantages of polymer systems include their lightness, durability, resistance to moisture and relative cheapness.

Metal sash

The door can be made of aluminum. This design option is quite rare, as it is suitable for a limited number of styles. Lovers of comfort are unlikely to like the abundance of metal in the room. But when decorating a room in a hi-tech or modern style, aluminum door structures are perfect for the situation.

The combination of various materials in the manufacture of paintings is also popular. The most commonly used combination of various materials is glass. A combination of wood and glass, as well as metal and glass elements, is popular when choosing a sash option for decorating a doorway.

Installation of the sliding door in the room

Install a retractable structure is not so difficult on their own. To do this, you need to have only some skills with a power tool.

The most commonly used version of the system is when the door leaf moves along the doorway. Before mounting the sliding door, it is necessary to trim the doorway. Several methods can be used for this:

plaster,
drywall
ceramic tile, etc.

One of the most common methods for preparing an opening for installing a retractable sheet is the installation of a false box that performs only decorative functions.

Video - Installing sliding doors

Table. Tools and fixtures necessary for work.

Name	Illustration
Screwdriver
Drill
Hammer
Saw (manual or electric)
Level plumb
Roulette, square, pencil
Hardware

Prices for popular drill models

The technology for fixing this design is as follows.

Step 1. According to preliminary measurements of the doorway, a U-shaped structure is assembled. For this, segments of MDF or chipboard panels are used.

To make the right product, you will need a screwdriver and Euroscrews (confirmats), which are ideal for assembling structures from thin-walled parts.

Step 2 Clogged wooden wedges will help fix the false box in the doorway.

It is necessary to check the installation of the box, using the level and plumb. The alignment of all elements largely determines the reliability and durability of the installed door system.

Step 3 Technological gaps (gaps formed between the duct and the opening) are filled with foam. For work, a construction gun is used, into which a cylinder with a polyurethane composition is inserted.

Quick Installation Guide

First step. Mounting rollers. Two mechanisms (if the door weight exceeds 60 kg, four pairs of wheels will be needed) must be fixed on the upper end of the canvas. The set of products, in addition to the actual rollers, with which the door will move along the guide, includes a mounting plate fixed on the door leaf, hardware (screws) and stoppers.

To fix the rollers, it is necessary to pre-mark and drill holes for fasteners.

Second phase. Handle installation. To be able to easily control the sliding structure, you need to fix the mortise handle.

The third stage. Rail mounting. A support block is installed above the doorway (metal corners can also be used to fasten the mechanism). To do this, you need screws with dowels, which must be recessed in the holes made in the wall.

Prices for popular models of screwdrivers

A rail is fastened to the bottom bar to move the door leaf (the distance between the lower edge of this part and the floor surface should be approximately 5 cm higher than the height of the door leaf). At its edges, door travel limiters are installed.

The fourth stage. Fastening a flag roller. The groove for this element must be made in the lower end part of the door leaf. A roller is needed to protect the door from lateral vibrations. It is fixed to the floor surface.

The fifth stage. Dressing mechanism. This step can be started after adjusting and checking the sliding door in operation. To hide the support block with the guide and rollers, you need to install a decorative false panel. It is made either from the same material as the door leaf itself, or it can act as an independent design element.

To fix the panel, you need finishing cloves that do not have a hat.

Sixth stage. The gaps between the raised box and the opening are masked by decorative platbands.

Functional sliding structures, the installation of which allows the most efficient use of the usable area and create comfort in the rooms, today have become a very popular solution in the decoration of residential premises. With proper installation, the rollback system can function properly for decades.

Mechanism

Sliding doors are a great opportunity to free up space and make the room more practical. The main component of this system is the roller mechanism, which is often installed on both the upper and lower ends.

This design consists of the following main components:

Guides. They are made of aluminum or its derivatives. The shape of the product depends on the type of door leaf and the supporting systems used. These parts are attached both from below and above the door leaf.
Roller system. It consists of several pairs of rollers that are attached directly to the door itself. They are also located below and above the canvas. The shape and size of these devices may vary, depending on the standard used by each manufacturer.

Please note that the lower rollers absorb the main load, and also prevent the door from swinging in different directions.

To reduce the noise level, many manufacturers make the working surface of the wheel from special types of rubber. Technically, sliding doors can be made independently from the old canvas. To do this, you need to select the necessary components, and then attach the rollers to the frame. When everything is ready, the walls are measured and the guides are fixed, inside which the door leaf is placed.

The installation process of such doors is clearly shown in the video below.

Sliding doors are gaining immense popularity today. They are not only compact, but also very practical.They are increasingly being installed in modern interiors in order to create an original design. Manufacturers produce many modifications of such products, which allows them to be classified according to several criteria.

Production material is one of the main indicators used to classify doors of this type. Today, for the manufacture of such products using several types of materials:

Glass. As the main product for the production of valves, only shock-resistant varieties of this substance are used. This makes it possible to provide an optimal level of safety and a long service life of glass products. As frames, aluminum profiles can also be used here, in which glass sheets are placed. But many modifications require only glass to which roller systems are attached. The latter option is much more expensive and less common. Externally, glass can be either transparent or frosted. Manufacturers complement its surface with carvings and many shades. If desired, the glass sash can be given a different shape. Particular attention should be paid to mirror surfaces that are original. But the cost of such products will be slightly higher than standard modifications.

MDF. One of the cheapest materials for the production of door leafs. In this case, the substance is perfectly suitable for interior structures. The material lends itself very well to processing and also resists moisture. Doors made of MDF can be complemented by carvings or original cutouts. Many of them are produced in combination with decorative glass, which allows you to radically change the design of the product. As for colors, there are practically no restrictions. Depending on the wishes of the client, the manufacturer can cover the product with paint of any shade.

Plastic. Sliding doors made of this material are quite rare. But they are the best option for bathrooms where it is constantly wet. Plastic products can also be of different colors, which allows you to combine them with different interiors.

Natural wood. Cloths of this substance are the most popular and practical interior products. Rollback systems made of wood can be complemented by carvings and glass inserts. They can be used both in modern and classic interiors. Manufacturers produce canvases from various tree species that differ in structure and shade. They are perfectly combined with other types of furniture, and also complement it.

Some manufacturers use non-standard materials for the production of sliding systems. So, for example, on the market you can find doors made of polycarbonate and other similar substances. At the same time, they externally can be in no way inferior to structures from previously described materials.

How to choose?

The variety of sliding doors is very large, which does not always allow the inexperienced buyer to make the right choice. To purchase a quality product, you should evaluate several of its parameters:

Web material. Doors are made of several substances that differ in price and design. It is important to select the doors in such a way that they not only suit your budget, but also fit well with the style of the room. Today, for example, canvases with a mirror are especially popular, which make the room even more spacious.
The presence of the box. This attribute gives the design a special charm. It not only acts as a limiter, but also creates a kind of design gate (portal) that visually breaks rooms into distinctive zones.
Quality and type of components. Door leafs move due to rollers and guides, which must be compatible with each other. At the same time, the structures must be of high quality, since the duration of the system depends on this. It is important to pay attention to the type of roller mechanisms that must support the weight of the web intended for them.
Dimensions and location. Many types of sliding doors are intended for wide openings, which does not allow them to be installed in an ordinary apartment.
Design. The external design of the doors is selected only depending on the personal desires of the buyer and the interior where they will be installed.

How to set?

Door installation methods vary depending on their type.

Open systems move along guides along the wall. These doors can be complemented by one or two leaves. Often, such modifications are the most popular. To exclude strong blows during opening, such designs are equipped with a door closer that smoothly closes all the wings.

Closed systems are located in a special niche. In most cases, it is made at the end of the wall or from sheets of drywall. When the door leaves are open, they are completely hidden inside the groove and are not visible from the outside. This design is very convenient, since the door and the guides do not interfere with movement and do not occupy excess space. It is quite difficult to make such a pencil case with your own hands, as this requires compliance with certain technologies. Therefore, the cost of constructing such systems is quite high, which affects their popularity.

Accordion-type door systems consist of several panelswhich are interconnected by special curtains. Each individual element can move relative to an adjacent segment. Therefore, when you open the door, the canvas folds like an accordion. But these sliding systems are supplemented by special guides that can support a significant weight of the canvas. Door movement can be either single or double-sided. These products are a great option for private homes with large rooms.

Almost all modifications of such door leaves are complemented by locks, which allows to limit the movement of leaves if necessary. The installation of these mechanisms requires careful measurements.

This is necessary to exclude possible distortions of the canvas and guides, which in this case will work tight.

Options in the interior

The white sliding single-door frosted glass door in the kitchen looks great against the background of the yellow walls. It looks very light, and chrome details adorn it - an open roller system and a large handle.

A double-winged interior wooden door, which combines strips of dark and white colors, strictly and originally complements the interior of the living room. A white sofa located nearby and light walls emphasize their elegance.